Foam Cannon
The VIKING Foam Cannon is designed to take your car care to the next level. The adjustable nozzle and high-capacity canister paired with high-pressure water flow, air, and your favorite liquid car wash will produce rich, thick, sudsy foam for a complete clean. The Foam Cannon must be used with a pressure washer, not a garden hose.
- Adjustable spray pattern and angle with 360° rotatable nozzle
- 1.1L (37.2 ounces) canister + 1.1mm orifice
- ¼ inch quick connect attachment
- Min. – Max. PSI: 1500-3500
- Minimum GPM: 1.4g
- Maximum water temperature: 140°
- Patent-pending design
Rich, Thick Foam
37.2 oz
(1.1 liter) canister
360º
rotatable nozzle
See it in Action
The VIKING Foam Cannon effortlessly generates a thick, luxurious layer of cleaning foam, taking your car washing experience to the next level.
Level Up Your Car Washing Experience
The VIKING Professional Foam Cannon has been designed with functionality, durability, and value in mind. It is constructed with
high-grade engineered materials and features a patent-pending design - you won't find this cannon anywhere else!
Paired with a pressure washer, the foam cannon delivers rich, thick foam for a phenomenal experience, because at VIKING, we're all about the experience.
Quick & Easy to Assemble
1. Remove & discard the black protective cap from the quick connect plug.
2. Attach the open end of the silicone pick-up tube into the suction port on the underside of the screw cap
3. Check to ensure the filter is secured to the other end of the silicone pick-up tube.
1. Remove protective cap from the quick connection plug.
2. Attach the open end of the silicone pick-up tube into the suction port (located on the underside of the screw cap).
3. Ensure the filter is secured to other end of the silicone pick-up tube.
Screw filled canister to the upper sprayer unit. Attach to the pressure washer wand using the 1/4" quick connect plug. Start the pressure washer & begin foaming. Adjust the soap dilution ratio, spray angle & spray pattern to your preferred settings.
You can use the Foam Cannon with a gas or electric pressure washer that produces a minimum of 1,500 pounds per square inch (PSI) and a flow rate of 1.4 gallons per minute (GPM).
The cannon requires the liquid soap to be pre-mixed with water prior to use. All soaps are made differently, so the soap-to-water ratio can vary. If ratios are not indicated, start with a 1 oz soap to 10 oz water ratio.
It is essential to thoroughly rinse the cannon after each use. To clean, fill the canister with clear water and then run the cannon until no foam or soap residue remains visible. Allow the canister and sprayer to dry before storage.
Product Information
Item Number
775501
User Manual
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
